High temperature and corrosion resistant stainless steel braided
metal hose
How the product works
The working principle of threaded metal hoses is achieved through
their unique structure and material properties. Threaded metal
hoses are made of stainless steel, galvanized steel, or other
corrosion-resistant metal materials, and are usually covered with a
layer of metal braided mesh to enhance the compressive and tensile
strength of the hose. This design allows the metal hose to remain
flexible even under high pressures and stresses, making it suitable
for complex or changeable working environments.
Product application field
1. Industrial field
2. Machinery manufacturing
3. Chemical industry
4. Construction and installation industry
5. Oil and gas industry.
6. Food and pharmaceutical industries
Preparation before product installation
1. Check the hose and fittings: Before installation, carefully check whether the metal hose and
its fittings are intact and whether there are defects such as
deformation and cracks. Confirm whether the hose specifications,
materials, working pressure and other parameters meet the design
requirements.
2. Prepare installation tools: Prepare corresponding installation tools, such as wrenches,
screwdrivers, clamps, etc., to ensure that the tools are intact and
can be used normally.
3. Determine the installation position: Make sure that the pipes at both ends of the hose connection have
been correctly installed and fixed firmly, and there are no sharp
and protruding obstacles in the installation position to avoid
external mechanical damage to the metal hose during use.
Product parameters
| Name of product | High temperature and corrosion resistant stainless steel braided
metal hose |
| Size | DN15-DN65 |
| Standard of flange | DIN, BS, ANSI, JIS,ISO,etc. |
| Connection | screw type |
| Application | Petrochemical, pharmaceutical, construction engineering,
agricultural field, etc |
| DN | Length | Axial compression | Axial extension | Horizontal displacement | Deflection angle |
| 15 | 280 | 10 | 5 | 20 | 450 |
| 20 | 280 | 10 | 5 | 20 | 450 |
| 25 | 280 | 10 | 5 | 20 | 450 |
| 32 | 280 | 10 | 5 | 20 | 450 |
| 40 | 300 | 10 | 5 | 20 | 450 |
| 50 | 300 | 10 | 5 | 20 | 450 |
| 65 | 300 | 10 | 5 | 20 | 450 |
Product installation steps
1. Install the clamp: Put the clamp on one end of the metal hose and make sure the clamp
fits tightly with the hose. Then, tighten the bolts of the clamp so
that there is a certain friction between the clamp and the hose to
prevent the hose from loosening.
2. Connect the hose to the pipe: Insert one end of the metal hose into the cleaned pipe connection
to ensure the alignment between the hose and the pipe. Then,
install the clamp on the other end as well and tighten the bolts.
Product installation precautions
1. Threaded connection should be tight: Make sure that the threaded connection part is clean, free of oil
stains, and screwed in place to prevent loosening or air leakage.
To improve the sealing effect, sealant or sealing tape can be used
at the thread, but it must be applied evenly and not excessively.
2. Avoid excessive twisting: Excessive twisting or forced bending should be avoided during
installation, which may cause damage to the pipe wall or loose
joints, affecting the sealing and service life of the joint.
3. Choose the right model and material: Choose the appropriate threaded metal hose and joint according to
the specific use environment and working conditions. For example,
in the chemical industry, it is recommended to use stainless steel
with higher corrosion resistance.
The product is displayed from different angles
Inventory display
FAQ
Q: Can the logo on the metal hose be customized?
A: Yes, it can be marked with your company's logo. We can provide
OEM and ODM services.
Q: Can the length of the metal hose be customized?
A: Of course, we have many different specifications and models of
molds, which can be customized according to your length.
Q: What are the advantages of metal hoses?
A: It has good flexibility, strong compression resistance, good
sealing, etc.
Q: How about the quality of your products?
A: The quality of our products is very good and they are all
third-party inspected.
Q: Do you accept small order quantities?
A: Yes, we accept small order quantities.
Q: Can I choose a different material for metal hoses?
A: Of course, we can make it according to the customer's
requirements.
